|
 |
Pioneer S-FL1 |
 |
Pioneer
Pioneer S-FL1 Pioneer S-FL1 Description: Pioneer has created a slim design speaker by using NXT SurfaceSound, based on Distributed Mode Loudspeaker technology. The S-FL1 flat panel speaker is designed for easy installation, providing high quality omni directional sound, making it ideal for architectural installations, stylish bars and cutting edge mobile DJs. They're also ideal for press conferences, graduations and corporate events where a variety of people will make presentations to a large audience. Pioneer S-FL1 Features: S-FL1 Speaker Type Flat Panel: Open Back Type NXT Frequency Response: 60 - 16,000 kHz Sensitivity: 90 dB Max Input Rating: 240W Max Output Rating (Continuous): 111dB Max Output Rating (Peak): 114dB Impedance: 8 ohm Magnetic Shielding: Yes Input Connector: 2 x Speakon / Neutrek Enclosure: Aluminum die cast and extrusion material Weight: 9.9kg Mounting All peripheral sides: (M8 x 2) x4 Dimensions (WxHxD): 675 x 500 x 55 Warranty: 1 year Get your Pioneer S-FL1 today! |
|
 |
Presonus ACP88 |
|
Presonus
Presonus ACP88 Presonus ACP88 Description: Presonus ACP88 - Eight Channel Compressor Limiter Gate The ACP88 gives you total dynamics control for multi-tracking and live sound reinforcement. Eight compressor/limiters deliver transparent dynamics control. Eight full featured gates seamlessly control unwanted noise and bleed-through. Control vocals, tame drums, protect speakers, tighten the low-end - all from just two rack spaces of powerful processing. Presonus ACP88 Features: Eight Full Featured Compressor/Limiters Eight Full Featured Gates Side Chain on Every Channel Trigger Inputs on Every Channel Balanced/Unbalanced I/O Comprehensive Linking via Unique Power Summing Bus Takes the Place of Multiple Processors Crystal Clear Compression & Gating for Multi-Tracking & Live Sound Allows Spectral Processing & Gate Keying via Separate Jacks +4/-10 Stereo Operating Level Presonus ACP88 Specifications: Number of Channels Eight Dynamic Range >115dB Signal to Noise Ratio >95dB Headroom +24dBu, Unbalanced +18dBu, Balanced Frequency Response 10Hz to 50kHz Crosstalk Compression Threshold Range -40dBu to +20dBu Compression Ratio 1:1 to 20:1 Compressor Attack Time 0.02ms to 200 ms Compressor Release Time 0.5ms to 500ms Auto Attack and Release Program Dependent Gate Threshold Range -70dBu to +20dBu Gate Attack Time 0.01ms to 100ms Gate Release Time 0.02ms to 2 sec Gate Attenuation Range -15dB or -60dB Input Impedance 10k Ohms Output Impedance 51 Ohms THD + Noise Output Gain -20dB to +20dB Compression Curve Types Hard and Soft Knee Compression Metering Above/Below Threshold LED Gate Metering Open and Closed LED Sidechain Output Impedance 51 Ohms Sidechain Input Impedance 10k Ohms Internal Operation Level +4dBu=0dBu Input Range +4dBu or -10dBu Input Connectors 1/4" TRS, Balanced or Unbalanced Output Connectors 1/4" TRS, Balanced or Unbalanced Compressor Sidechain Connector 1/4" TRS Gate Sidechain Connector 1/4" TRS Power Supply Internal, Linear Supply Power Requirements 100V AC to 120V AC or 200V AC to 240V AC Power Connection IEC Receptacle Size 2U Rack Dimensions 19" x 3.5" x 7" Weight 12lbs. Get your Presonus ACP88 today |
|
 |
Presonus DigiMax 96k |
|
Presonus
Presonus DigiMax 96k Presonus DigiMax 96k Description: Now with 96k sampling rate*, the DigiMAX is the newest member in the award winning family of Presonus mic preamp's. Combine eight channels of pristine mic preamplification with 24 simultaneous digital and analog outputs, and the DigiMAX 96k seamlessly fits into any digital recording situation. The DigiMAX 96k is the perfect front-end for DAW's as well as adding mic pre's to digital mixers and sound cards. A mic pre with heritage We started with the same design as the MP20, M80 and VXP: Class A Discrete Input Buffers followed by a dual-servo gain stage giving you 60db of preamp gain with 52db of headroom. The DigiMAX 96k is electronically balanced and features phase reverse on the first two channels, as well as a 20dB pad and selectable 48v phantom power on each channel. A unique feature is EQ Enhance which contours the EQ curve -4dB centered at 1k from 250Hz to 5kHz. This is especially helpful on drum overheads and other sources to bring out definition and notch out problem frequencies. The compressor trapped in the body of limiter What makes a limiter musical? Typically, most limiters use peak detection which actually clips the signal and can produce nasty artifacts. RMS detection, though commonly used with most compressors, has the drawback of not being fast enough to catch extremely fast transients. The DigiMAX 96k uses both RMS and Peak detection to give you the best of both worlds. The DigiMAX 96k uses an RMS style compressor with a high ratio while the peak portion is used only to protect the input of the A/D converter from clipping. The end result? Fast, musical, natural and able to catch anything you throw at it. Connectivity for days The DigiMAX 96k features more I/O options than any mic pre on the planet! 8 XLR Mic Inputs + 2 1/4" Instrument Inputs. The outputs consist of 8 balanced TRS analog outputs plus a 24 bit ADAT lightpipe output AND (4) stereo RCA SPDIF Digital Ouputs (Unit ships in AES/EBU mode, breakout cable not included). And here's the best part... They all work simultaneously! The Ultimate Live Recording Preamp! Use the ADAT Lightpipe Outputs to feed your recorders digital inputs while you send an identical signal to a FOH Console via the TRS Analog Outputs. Bye, bye latency! Use the TRS analog outputs to monitor tracks while you send the Lightpipe to your soundcard or standalone computer interfaces like MOTU 2408 and Digi001. Mixer Beefer-Upper! Add high gain/low noise quality micpre's to your digital console using either Lightpipe, AES/EBU, SPDIF, or analog TRS outputs. Presonus DigiMax 96k Features: 44.1, 48, 88.2 and 96kHz Sample Rates Ultra-Wide Dynamic Range Low-Noise Operating Levels Dual-Domain Limiter on Every Channel EQ Enhance on Every Channel -20dB Pad on Every Channel 48V Phantom Power on Every Channel Instrument Input on Channels One and Two Phase Reverse on Channels One and Two Eight 24-bit ADC Converters ADAT Lightpipe Output S/PDI |
|
 |
Presonus DigiMax FS |
|
Presonus
Presonus DigiMax FS Presonus DigiMax FS Description: The DigiMax FS is an eight-channel microphone preamplifier, with 24-bit/96k ADAT dual SMUX I/O and word clock I/O. Loaded with direct outputs and inserts on every channel, the DIGIMAX FS is the perfect hardware expansion for your FireStudio or any digital recording system with optical light pipe expansion capability including DigiDesign's HD and 002 systems, RME, YAMAHA, Alesis, Mackie and many others. The DigiMax FS is loaded with new patented JetPLL jitter reduction technology ensuring ultra-high converter performance, fast and robust locking through a wide range and variation of frequencies and noise shaping to remove nearly all audio band jitter. Presonus DigiMax FS Features: 8 XMAX Class A microphone preamps w/ trim control 24-bit resolution, 44.1, 48, 88.2 and 96K sampling rate 96k ADAT input and output (dual SMUX) JetPLL jitter reduction technology for ultra tight synchronization Direct outputs and inserts on every channel Word clock input and output Hybrid design incorporates noise shaping to virtually remove audio band jitter. Ensures highest converter performance possible, resulting in better separation. Fast locking to any digital format, through a wide range of frequencies. Extremely robust, and tolerant of wide variations in clock frequencies. Ensures near perfect clock performance when networking audio devices. Dual VCXO loop performance and quality. Get your Presonus DigiMax FS today! |
|
 |
Presonus DigiMax LT |
|
Presonus
Presonus DigiMax LT Presonus DigiMax LT Description: The DigiMAX LT is essential to the modern digital studio. Eight channels of pristine mic preamplification, inserts on every channel, and an internal power supply set this unit apart from anything on the market. Each channel features our award-winning, high performance, dual servo microphone preamplifiers with 48V phantom power, and -20dB pad. Each channel features a Neutrikconnector that accepts line level or microphone input. DigiMAX LT digital synchronization is achieved by offering word clock in and out via BNC connectors. The sample rate can be set on the front panel to 48K, 44.1K, and 32K providing compatibility across multiple platforms. The DigiMAX LT provides TRS inserts on every channel to allow external dynamics processors or equalizers to be placed in the signal chain. The DigiMAX LT is the perfect partner for recording systems such as DigiDesign 002, MOTU828, MOTU 2408 as well as numerous digital mixers and hard disk recorders Presonus DigiMax LT Features: ADAT LightPipe Output Eight Dual Servo Mic Preamps and Line Inputs Eight TRS Insert Points Linear Internal Power Supply 48V Phantom Power on Each Channel -20dB Pad on Each Channel Adjustable Sample Rates BNC I/O for Sync Presonus DigiMax LT Specifications: Number of Channels - Eight Input Input Impedance, XLR Input - 1.3k Ohms Input Impedance, Line Level Input - 10k Ohms Connectors - Neutrik Combo Panel Controls Gain Range of Potentiometer (+10dB at lowest setting) - 0dB to +45dB Pad - -20 dB Phantom Power - +48 V Meters Signal Present LED - -20dBu Clip LED - +22dBu Output ADAT LightPipe Digital Optical - 24-bit Insert (TRS) Send (Unbalanced) - 51 Ohms Return (Unbalanced) - 10k Ohms Digital Sampling Rates - 32kHz, 44.1kHz, 48kHz Performance Maximum Preamplifier Gain +55dB Headroom +22dB Frequency Response 20Hz-50kHz THD + Noise (Unweighted) Noise Floor -94dBu Signal to Noise >98dB Analog Dynamic Range >120dB Power Supply Rejection >98dB Amplifier Type Dual Servo Power Supply Type - Linear, Internal Input: 100/120/220/240V AC (Factory Configured) Power - 80 Watts Physical Size - 1U Rack Dimensions - 19" x 1.75" x 9" Weight - 10 lbs. Chassis - Steel Panel - Aluminum Get your Presonus DigiMax LT today! |
|
 |
Presonus FireStudio |
|
Presonus
Presonus FireStudio Presonus FireStudio Description: The PreSonus FireStudio is the next generation in FireWire recording systems from PreSonus. Based on the award-winning Firepod, the FireStudio combines superior analog circuit design with new advanced platform technology to deliver enhanced performance for music recording and creation. The FireStudio is a 26x26 24-bit/96k professional recording system combining eight XMAX Class A PreSonus microphone preamplifiers, up to sixteen channels of optical ADAT input / output, S/PDIF and MIDI input / output, along with the Control Console - a 36x36x18 zero latency mixer/router. The FireStudio also includes the ProPak Complete, a bundle of over 2GB of award-winning recording and production software, virtual instruments, plug-ins, drum loops and samples to get you started making music immediately. The FireStudio is loaded with the new ultra powerful DICE II FireWire chipset delivering 26 channels of simultaneous inputs and outputs at professional-quality 24-bit. The strength of the DICE II chip lies with its ability to easilly handle high channel count at high bit-rate while minimizing latency and load on your computer. hte synchronization of the FireStudio is handled by patented JetPLLTM jitter reduction technology. JetPLLTM incorporates noise shaping to virtually remove all audio band jitter. JetPLLTM ensures the highest converter performance possible, resulting in better stereo separation and clearer more transparent audio. JetPLLTM delivers ultra-fast locking to any digital format, through a wide range of frequencies and is extremely robust, and tolerant of wide variations in clock frequencies. JetPLLTM ensures near perfect clock performance when networking audio devices thus creating the most stable and robust synchronization to the computer and all devices synchronization with the FireStudio. Ins and Outs The FireStudio is loaded with I/O for an extremely flexible and expandable recording system. The FireStudio starts with eight Class A custom-designed PreSonus microphone preamplifiers. You can add additional preamplifiers or analog inputs via the dual optical light pipe ports on the rear panel. You add up to two DigiMax FS, for a total of twenty-four microphone preamplifiers all in only three rack spaces! Additionally word/clock I/O for ultra tight synchronization, MIDI I/O and SPDIF I/O are on the FireStudio for further expandability. Control Console - Zero Latency DSP Mixing/Routing The FIRESTUDIO also includes the Control Console - a 36x36x18 DSP mixer/router for flexible mixing and direct routing any input to any output including the headphone output, with zero latency. The Control Console software application lives between your FireStudio interface and your DAW software enabling the mixing and routing of input streams coming into your FireStudio interface and playback stream coming from your DAW software. The Control Console is capable of creating up to nine stereo mixes and then routing to t |
|
 |
QSC Audio PLX1104 Professional Power Amplifier |
|
QSC
QSC Audio PLX1104 Professional Power Amplifier The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback. SPECIFICATIONS SPECIFICATIONS PLX1104 Stereo Mode 8 ohms (each channel) FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 310 W 325 W Stereo Mode 4 ohms (each channel) FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 500 W 550 W Signal to Noise (20 Hz - 20 kHz) -106 dB Input Sensitivity @ 8 ohms 1.18 Vrms Gain @ 8 ohms 32.5 dB Output Circuitry AB Distortion (SMPTE-IM) Less than 0.02% Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz Less than 0.02% Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 200 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 5.5 Vrms (+15 dBu) Cooling Variable-speed fan, rear-to-front air flow Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik NL4 Speakon (Both channels available on Ch 1 output) Rear Panel Switches Circuit Breaker Front Panel Controls Detented Input Attenuator: 0 to &infin |
|
 |
QSC Audio PLX1802 Professional Power Amplifier |
|
QSC
QSC Audio PLX1802 Professional Power Amplifier The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. The PLX1802 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX1802 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. SPECIFICATIONS PLX1802 STEREO MODE, both channels driven * 8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 320 W 330 W 4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 525 W 575 W 2 ohms EIA 1 kHz 1% THD 900 W BRIDGE MONO MODE * 8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD 1100 W 1200 W 4 ohms 1 kHz 1% THD 1800 W Signal to Noise (20 Hz - 20 kHz) -107 dB Input Sensitivity @ 8 ohms 1.28 Vrms Gain @ 8 ohms 32 dB Output Circuitry AB Distortion (SMPTE-IM) Less than 0.02% Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz Less than 0.02% Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 500 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 11 Vrms (+21 dBu) Cooling |
|
 |
QSC Audio PLX1804 Professional Power Amplifier |
|
QSC
QSC Audio PLX1804 Professional Power Amplifier The compact PLX1804 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1804 is perfect for ultra-portable rigs, as well as reference-quality playback. SPECIFICATIONS PLX1804 Stereo Mode 8 ohms (each channel) * FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 550 W 600 W Stereo Mode 4 ohms (each channel) * FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 800 W 900 W Signal to Noise (20 Hz - 20 kHz) -106 dB Input Sensitivity @ 8 ohms 1.20 Vrms Gain @ 8 ohms 35 dB Output Circuitry 2-Step Class H Distortion (SMPTE-IM) Less than 0.02% Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz Less than 0.02% Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 200 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 5.5 Vrms (+15 dBu) Cooling Variable-speed fan, rear-to-front air flow Input Connectors, each channel 3-pin XLR and 1/4" TRS balanced Output Connectors, each channel Neutrik NL4 Speakon (Both channels available on Ch 1 output) Rear Panel Switches Circuit Breaker Front Panel Controls Detented Input Attenuator: 0 to dB |
|
 |
QSC Audio PLX2502 Professional Power Amplifier |
|
QSC
QSC Audio PLX2502 Professional Power Amplifier The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. The PLX2502 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX2502 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. SPECIFICATIONS PLX2502 STEREO MODE, both channels driven * 8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 425 W 450 W 4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 675 W 750 W 2 ohms EIA 1 kHz 1% THD 1250 W BRIDGE MONO MODE * 8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD 1400 W 1500 W 4 ohms 1 kHz 1% THD 2500 W Signal to Noise (20 Hz - 20 kHz) -106 dB Input Sensitivity @ 8 ohms 1.15 Vrms Gain @ 8 ohms 34 dB Output Circuitry 2-Step Class H Distortion (SMPTE-IM) Less than 0.02% Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz Less than 0.02% Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 500 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 11 Vrms (+21 dBu) |
|
 |
QSC Audio PLX3102 Professional Power Amplifier |
|
QSC
QSC Audio PLX3102 Professional Power Amplifier The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. The PLX3102 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3102 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. SPECIFICATIONS PLX3102 STEREO MODE, both channels driven * 8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 550 W 600 W 4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 900 W 1000 W 2 ohms EIA 1 kHz 1% THD 1550 W BRIDGE MONO MODE * 8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD 1900 W 2100 W 4 ohms 1 kHz 1% THD 3100 W Signal to Noise (20 Hz - 20 kHz) -107 dB Input Sensitivity @ 8 ohms 1.23 Vrms Gain @ 8 ohms 35 dB Output Circuitry 2-Step Class H Distortion (SMPTE-IM) Less than 0.02% Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz Less than 0.02% Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 500 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 11 Vrms (+21 dBu) Cooling |
|
 |
QSC Audio PLX3602 Professional Power Amplifier |
|
QSC
QSC Audio PLX3602 Professional Power Amplifier The PLX2 series is a range of premium quality, high-power amplifiers designed for the most demanding live performance uses. Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. The PLX3602 is an excellent choice for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or when extremely high power bridge mono operation is required. The PLX3602 features built-in subwoofer processing, filter switches, and front panel indications of bridge mono status. SPECIFICATIONS PLX3602 STEREO MODE, both channels driven * 8 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 725 W 775 W 4 ohms FTC 20 Hz - 20 kHz 0.05% THD EIA 1 kHz 0.1% THD 1100 W 1250 W 2 ohms EIA 1 kHz 1% THD 1800 W BRIDGE MONO MODE * 8 ohms 20 Hz-20 kHz 0.1% THD EIA 1 kHz 0.1% THD 2500 W 2600 W 4 ohms 1 kHz 1% THD 3600 W Signal to Noise (20 Hz - 20 kHz) -107 dB Input Sensitivity @ 8 ohms 1.25 Vrms Gain @ 8 ohms 36 dB Output Circuitry 2-Step Class H Distortion (SMPTE-IM) Less than 0.02% Typical Distortion 1/8 rated power, 20 Hz-20 kHz Full rated power, 20 Hz-20 kHz Less than 0.02% Less than 0.02% Frequency Response 20 Hz-20 kHz, -0.5 dB Damping Factor Greater than 500 Input Impedance 20k ohms balanced 10k ohms unbalanced Input Clipping 11 Vrms (+21 dBu) Cooling |
|
 |
QSC Audio RMX 2450 Professional Power Amplifier |
|
QSC
QSC Audio RMX 2450 Professional Power Amplifier The RMX Series amplifiers give you clean, dynamic power with the legendary QSC sound quality and reliability that pros depend on. The RMX Series deliver unmatched performance at a new breakthrough price. Muscular Power Plant The power supply is the heart of an amplifier, converting raw AC power from the wall to clean DC for the audio circuitry. The RMX uses a powerful high-current toroidal transformer and ample filter capacitance to ensure generous energy reserves. This makes a critical difference in sound quality, allowing the amp to effortlessly punch out high level transients, even when driving abusive 2-ohm speaker loads. Superior Performance RMX amplifiers deliver true studio-quality sound. A full complementary output circuit using the highest-grade linear output devices delivers ultra-low distortion ( <0.05% THD) & a ruler-flat frequency response. SMT (Surface Mount Technology) triples small-signal component density, enabling us to pack up to 2400 watts of power in a chassis only 2 rack spaces & less than 16" deep. And unlike other designs, RMX output devices are direct-mounted to the heat sink for optimum thermal coupling & cooling. Comprehensive Features The RMX Series is packed full of professional features that increase performance and flexibility: The RMX 1850HD provides improved thermal performance that gives you higher continuous power in 2-ohms stereo or 4-ohms bridged applications (a RMX 1850HD exclusive!) Independent defeatable clip limiters reduce distortion without sacrificing peak performance. Selectable low-frequency filters boost system response, protect speakers and ensure low-end tightness by more precisely matching the amplifier's range to the loudspeakers. Barrier strip, XLR and 1/4" balanced inputs plus Speakon and binding post outputs provide easy connections. Low-noise variable speed fans with rear-to-front air flow keep amplifiers and racks cool. Proven Reliability With over 30 years of building amplifiers for the largest touring companies and venues around the world, you can count on QSC's reputation for designing the most reliable amps available. Features: Compact size--up to 2400 watts in 2 rack spaces Professional quality performance--incorporates road-proven QSC designs High-current toroidal transformers for greater two-ohm power and low noise Independent user-defeatable clip limiters reduce distortion Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom Balanced 1/4" (6.3mm) TRS, XLR and barrier strip inputs Binding post and Neutrik Speakon outputs Front mounted gain controls for easy access Signal and Clip LED indicators to monitor performance Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers 3-year warranty plus optional 3-year extended service contract RMX SPECIFICATIONS RMX 850 RMX 1450 RMX 1850HD RMX 2450 STEREO MODE, EIA: Both Channels Driven |
|
| |
