|
 |
Rosendahl NanoClocks |
 |
Rosendahl
Rosendahl NanoClocks Overview Nanoclocks is a word clock distributor with integrated audio master clock generator, dual inputs with frequency status indicators and programmable output matrix - a flexible tool for all extensive digital audio installations. The unit provides two transformer isolated word clock inputs and 12 word clock outputs to receive and distribute word clock signals over long distances. Ground potential variations, similar to earthloop induced hum in analog audio, can cause jitter in clock signals, a transformer isolated input eliminates this effect. In operation mode DISTRIBUTOR the two inputs A and B can be routed individually to each of the 12 outputs. Ten LEDs on the front panel indicate the sample rate of the incoming signals. Input B also accepts Fs x256 signals (also known as super clock). GENERATOR mode changes the unit into a ultra low jitter audio master clock generator with 12 programmable outputs. Supported sample rates are 44.1, 48, 88.2, 96, 176.4 and 192 kHz as well as the respective super clocks (Fs x256). FAILSAFE mode is a broadcast application, which monitors the two input signals and performs an automatic switch over of all 12 outputs if the primary word clock signal fails Features two transformer isolated word clock inputs and 12 word clock outputs dual frequency status indicators internal ultra low jitter audio master clock generator Specifications word clock input A: transformer isolated BNC, 75 ohms internal terminated 32-100 kHz (Fs x1 - Fs x2), minimum level = 0.7 Vpp word clock input B: transformer isolated BNC, 75 ohms internal terminated 32-200 kHz (Fs x1 - Fs x4) or 10-13 Mhz (Fs x256), minimum level = 0.7 Vpp word clock outputs: 12 x BNC, 3.5 Vpp @ 75 ohms outputs 1-4: FS x1 - FS x4 or Fs x256 (super clock) outputs 5-12: FS x1 - FS x4 internal clock generator: 48 kHz, 96 kHz, 192 kHz, 12.288 MHz (XTAL 1) 44.1 kHz, 88.2 kHz, 176.4 kHz, 11.2896 MHz (XTAL 2) crystal accuracy +/- 5 ppm @ ambient temperature 15-30 Celsius clock jitter power supply: internal linear power supply, 10 watts, 115 VAC or 230 VAC version available dimensions: 1U-19" 41,5 cm W x 4,2 cm H x 12,5 cm D weight: 2,0 kg |
|
 |
Rosendahl NanoSyncs |
|
Rosendahl
Rosendahl NanoSyncs Overview Nanosyncs is a universal synchronisable audio clock reference with multiple outputs and integrated video black & burst generator. Nanosyncs makes studio setups less complicated, more flexible and optimizes audio quality. When each digital audio device receives a separate clock signal, the digital audio connections are not used as clock lines and can be patched freely. Nanosyncs provides six separate word clock, one AES / EBU, one SPDIF and four video outputs. The word clock outputs can be individually configured as FS x1 (44.100 / 48.000 kHz), FS x2 (88.200 / 96.000 kHz), FS x4 (176.4 / 192 kHz) or FS x256 (also known as Digidesign Super Clock) signals. The unit provides 0.1% (1001/1000) and 4% (25/24) pull up and pull down rates for audio, video and film transfers. The audio clock synthesiser can be resolved to the internal 1ppm accurate video time base, to external PAL or NTSC video syncs, to an external audio word clock or even to free running LTC time code. All audio clock signals are direct digital sythesised (DDS) by a high speed RISC controller giving 73 pico seconds resolution. The pure digital technique reduces clock jitter to below measurable levels. The internal video sync generator is available as PAL or NTSC version. In "Internal" mode the four video outputs are connected to the internal black & burst generator. In all other operation modes the video outputs distribute the video input signal. Each of the four video outputs is individually buffered. The unit has a robust aluminium housing and a built-in linear power supply. Features universal synchronisable audio clock reference with multiple outputs and integrated video black & burst generator 1 ppm accurate internal video time base DDS audio clock synthesiser reduces clock jitter below measurable levels Specifications video input: BNC female, 75 ohms terminated, PAL/ NTSC composite sync word clock input: BNC female, 75 ohms terminated, 1,5 - 5 Vpp, 40 - 51 kHz or 80 - 102 kHz LTC input / through: 2 x BNC female, parallel connected, -40 to +20 dBu, 10k ohms SPDIF output: RCA female, coaxial 75 ohms, 0,5 Vpp, IEC 958 AES / EBU output: XLR 3-pin male, transformer balanced, 110 ohms, 3,5 Vpp, AES-3 (FS x1 or FS x2) word clock outputs: 6 x BNC female, 75 ohms, 3,5 Vpp @ 75 ohms individual configurable output multipliers: FS x1, FS x2, FS x4 or FS x256 with four different output configuration setups video outputs: 4 x BNC female, 75 ohms, 1 Vpp @ 75 ohms, PAL or NTSC video sync (black & burst) audio clock synthesiser: FS x1, FS x2, Fs x4, FS x256 from sample frequencies 42.336, 44.056, 44.100, 44.144, 45.937 kHz 46.080, 47.952, 48.000, 48.048, 50.000 kHz lock range to external LTC is +/- 10% of nominal speed lock range to external word clock is 40 - 51 kHz or 80 - 102 kHz random jitter amplitude clock jitter internal time base: +/- 1 ppm @ ambient temperature 15 - 30 Celsius video sync generator: PAL or NTSC version available, 300 mV H/V-sync level, 3 |
|
 |
Sabian Gongs And Percussion 34 Inch Chinese Gong |
|
Sabian
Sabian Gongs And Percussion 34" Chinese Gong Description: Traditionally hammered for prized oriental sound. Produces a definite primary impact response followed by an outpouring of raw, dark overtones. Very full sounding. |
|
 |
Sabian Gongs And Percussion 40 Inch Chinese Gong |
|
Sabian
Sabian Gongs And Percussion 40 Inch Chinese Gong Description: Traditionally hammered for prized oriental sound. Produces a definite primary impact response followed by an outpouring of raw, dark overtones. Very full sounding. |
|
 |
Sabian Gongs And Percussion Set Of 13 Resonating Bells |
|
Sabian
Sabian Gongs And Percussion Set Of 13 Resonating Bells |
|
 |
Sabian Hand Hammered 21 Inch Germanic Cymbals |
|
Sabian
Sabian HAND HAMMERED 21" GERMANIC CYMBALS Description: Heaviest pairing delivers dark tonality with powerful, musically robust responses. |
|
 |
Sabian Hand Hammered 21 Inch Symphonic Medium |
|
Sabian
Sabian HAND HAMMERED 21" SYMPHONIC MEDIUM Description: Symphonic Medium Light Warm, musical tonality with sensitivity and shimmer. Symphonic Medium Heavy Warm traditional tone with increased clarity. |
|
 |
Sabian Hand Hammered 21 Inch Viennese Cymbals |
|
Sabian
Sabian HAND HAMMERED 21" VIENNESE CYMBALS Description: Medium-weight models respond with fuller sounds and moderate decay. |
|
 |
Sabian Hand Hammered 21Inch French Cymbals |
|
Sabian
Sabian HAND HAMMERED 21" FRENCH CYMBALS Description: Thinnest models with lightest weight respond quickly with warm, glassy sounds. |
|
 |
Sabian Hand Hammered 22 Inch French Cymbals |
|
Sabian
Sabian HAND HAMMERED 22" FRENCH CYMBALS Description: Thinnest models with lightest weight respond quickly with warm, glassy sounds. |
|
 |
Sabian Hand Hammered 22 Inch Germanic Cymbals |
|
Sabian
Sabian HAND HAMMERED 22" GERMANIC CYMBALS Description: Heaviest pairing delivers dark tonality with powerful, musically robust responses. |
|
 |
Sabian Hand Hammered 22 Inch Symphonic Medium |
|
Sabian
Sabian HAND HAMMERED 22" SYMPHONIC MEDIUM Description: Symphonic Medium Light Warm, musical tonality with sensitivity and shimmer Symphonic Medium Heavy Warm traditional tone with increased clarity. |
|
 |
Sabian Hand Hammered 22 Inch Viennese Cymbals |
|
Sabian
Sabian HAND HAMMERED 22" VIENNESE CYMBALS Description: Medium-weight models respond with fuller sounds and moderate decay. |
|
| |
