|
 |
Crown XS 500 |
 |
Crown
Crown XS 500 Crown XS 500 Description: The Xs Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. Crown XS 500 Features: Housed in a rugged, all-steel 2U chassis. Efficient forced-air fan prevents excessive thermal buildup. XLR-1/4" combo inputs, 3-pin Phoenix-style inputs, daisy-chain XLR outputs, touch-proof binding post outputs and Speakon outputs. Precision detented level controls, power switch, and five LEDs which indicate clip for each channel, power, AC mains, temperature and fault conditions. Microprocessor-controlled protection system. Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications. Crown XS 500 Specifications: The following applies to units in Stereo mode with 8-ohm loads and rated input sensitivity unless otherwise specified. XS500 1khz Power 2 ohm Dual(Per .ch)740W** 4 ohm Dual(Per .ch)500w 8 ohm Dual(Per .ch)400w 4 ohm Bridge 1600w** 8 ohm Bridge 1450w kHz Power: refers to maximum average power in watts at 1kHz with 0.15% THD. ** at 0.5% THD. Performance Power Output: See power charts above. Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V Frequency Response (at 1 watt): 22 Hz to 22 kHz: 1 dB. Phase Response (degrees at 1 watt, 20 Hz to 20 kHz): +5, 18 Signal-to-Noise Ratio: A-weighted, below rated power: > 102 dB. 22Hz to 22kHz, below rated power: > 97 dB. Total Harmonic Distortion (THD) at full bandwidth power, from 20 Hz to 20 kHz: 0.5%. Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to 40 dB: Damping Factor (8 ohm) 10 Hz to 400 Hz: > 200. Crosstalk (below rated power): Xs500 (1 kHz, 20 kHz): > 55 dB, > 55 dB Xs700 (1 kHz, 20 kHz): > 55 dB, > 55 dB Xs900 (1 kHz, 20 kHz): > 67 dB, > 62 dB Xs1200 (1 kHz, 20 kHz): >65 dB, >45 dB Xs4300 (1 kHz, 20 kHz): > 57 dB, > 40 dB Voltage Gain (at maximum level setting): Xs500: 32:1 (30.1 dB) Xs700: 38:1 (31.6 dB) Xs900: 42:1 (32.5 dB) Xs1200: 47.4:1 (33.5 dB) Xs4300: 25:1 (27.8 dB) Load Impedance: Safe with all types of loads. Xs500, 700, 900, 1200: 2 to 8 ohms in Stereo, 4 to 8 ohms in Bridge Mono. Xs4300: 4 to 8 ohms in Stereo, 8 ohms in Bridge Mono. AC Line Voltage and Frequency Configurations Available (10%): 120VAC/60 Hz and 230VAC/50 Hz. Controls Level: Two or four front-panel, gray rotary level controls, one for each channel. Power: Front-panel switch; on when in the right-hand position. Indicators Signal: Two or four green LEDs, one for each channel, illuminates when the channels input signal level is above 40 dBu. Clip: Two or four front-panel red LEDs, one for each channel, illuminates when the channels output signal is being overdriven. Power: Yellow front-panel LED indicates amplifier has been turned on and AC power is available. AC Mains: Red fron |
|
 |
Crown XS 700 |
|
Crown
Crown XS 700 Crown XS 700 Description: The Xs Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. Crown XS 700 Features: Housed in a rugged, all-steel 2U chassis. Efficient forced-air fan prevents excessive thermal buildup. XLR-1/4" combo inputs, 3-pin Phoenix-style inputs, daisy-chain XLR outputs, touch-proof binding post outputs and Speakon outputs. Precision detented level controls, power switch, and five LEDs which indicate clip for each channel, power, AC mains, temperature and fault conditions. Microprocessor-controlled protection system. Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications. Crown XS 700 Specifications: The following applies to units in Stereo mode with 8-ohm loads and rated input sensitivity unless otherwise specified. XS700 1khz Power 2 ohm Dual(Per .ch)900W** 4 ohm Dual(Per .ch)750w 8 ohm Dual(Per .ch)4500w 4 ohm Bridge 1,900w** 8 ohm Bridge 1645w kHz Power: refers to maximum average power in watts at 1kHz with 0.15% THD. ** at 0.5% THD. Performance Power Output: See power charts above. Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V Frequency Response (at 1 watt): 22 Hz to 22 kHz: 1 dB. Phase Response (degrees at 1 watt, 20 Hz to 20 kHz): +5, 18 Signal-to-Noise Ratio: A-weighted, below rated power: > 102 dB. 22Hz to 22kHz, below rated power: > 97 dB. Total Harmonic Distortion (THD) at full bandwidth power, from 20 Hz to 20 kHz: 0.5%. Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to 40 dB: Damping Factor (8 ohm) 10 Hz to 400 Hz: > 200. Crosstalk (below rated power): Xs500 (1 kHz, 20 kHz): > 55 dB, > 55 dB Xs700 (1 kHz, 20 kHz): > 55 dB, > 55 dB Xs900 (1 kHz, 20 kHz): > 67 dB, > 62 dB Xs1200 (1 kHz, 20 kHz): >65 dB, >45 dB Xs4300 (1 kHz, 20 kHz): > 57 dB, > 40 dB Voltage Gain (at maximum level setting): Xs500: 32:1 (30.1 dB) Xs700: 38:1 (31.6 dB) Xs900: 42:1 (32.5 dB) Xs1200: 47.4:1 (33.5 dB) Xs4300: 25:1 (27.8 dB) Load Impedance: Safe with all types of loads. Xs500, 700, 900, 1200: 2 to 8 ohms in Stereo, 4 to 8 ohms in Bridge Mono. Xs4300: 4 to 8 ohms in Stereo, 8 ohms in Bridge Mono. AC Line Voltage and Frequency Configurations Available (10%): 120VAC/60 Hz and 230VAC/50 Hz. Controls Level: Two or four front-panel, gray rotary level controls, one for each channel. Power: Front-panel switch; on when in the right-hand position. Indicators Signal: Two or four green LEDs, one for each channel, illuminates when the channels input signal level is above 40 dBu. Clip: Two or four front-panel red LEDs, one for each channel, illuminates when the channels output signal is being overdriven. Power: Yellow front-panel LED indicates amplifier has been turned on and AC power is available. AC Mains: Red fr |
|
 |
Crown XS 900 |
|
Crown
Crown XS 900 Crown XS 900 Description: The Xs Series of power amplifiers from Crown represents a new era in affordable, quality power amplification. The line consists of four models in a uniform, rugged 2U chassis, incorporating the best of tried-and-true design principles and innovative features. Crown XS 900 Features: Housed in a rugged, all-steel 2U chassis. Efficient forced-air fan prevents excessive thermal buildup. XLR-1/4" combo inputs, 3-pin Phoenix-style inputs, daisy-chain XLR outputs, touch-proof binding post outputs and Speakon outputs. Precision detented level controls, power switch, and five LEDs which indicate clip for each channel, power, AC mains, temperature and fault conditions. Microprocessor-controlled protection system. Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications. Crown XS 900 Specifications: The following applies to units in Stereo mode with 8-ohm loads and rated input sensitivity unless otherwise specified. XS500 1khz Power 2 ohm Dual(Per .ch)1200** 4 ohm Dual(Per .ch)900w 8 ohm Dual(Per .ch)600w 4 ohm Bridge 2500w** 8 ohm Bridge 2100w kHz Power: refers to maximum average power in watts at 1kHz with 0.15% THD. ** at 0.5% THD. Performance Power Output: See power charts above. Sensitivity (volts RMS) for full rated power at 4 ohms: 1.4V Frequency Response (at 1 watt): 22 Hz to 22 kHz: 1 dB. Phase Response (degrees at 1 watt, 20 Hz to 20 kHz): +5, 18 Signal-to-Noise Ratio: A-weighted, below rated power: > 102 dB. 22Hz to 22kHz, below rated power: > 97 dB. Total Harmonic Distortion (THD) at full bandwidth power, from 20 Hz to 20 kHz: 0.5%. Intermodulation Distortion (IMD): (60 Hz and 7 kHz at 4:1) from full rated output to 40 dB: Damping Factor (8 ohm) 10 Hz to 400 Hz: > 200. Crosstalk (below rated power): Xs500 (1 kHz, 20 kHz): > 55 dB, > 55 dB Xs700 (1 kHz, 20 kHz): > 55 dB, > 55 dB Xs900 (1 kHz, 20 kHz): > 67 dB, > 62 dB Xs1200 (1 kHz, 20 kHz): >65 dB, >45 dB Xs4300 (1 kHz, 20 kHz): > 57 dB, > 40 dB Voltage Gain (at maximum level setting): Xs500: 32:1 (30.1 dB) Xs700: 38:1 (31.6 dB) Xs900: 42:1 (32.5 dB) Xs1200: 47.4:1 (33.5 dB) Xs4300: 25:1 (27.8 dB) Load Impedance: Safe with all types of loads. Xs500, 700, 900, 1200: 2 to 8 ohms in Stereo, 4 to 8 ohms in Bridge Mono. Xs4300: 4 to 8 ohms in Stereo, 8 ohms in Bridge Mono. AC Line Voltage and Frequency Configurations Available (10%): 120VAC/60 Hz and 230VAC/50 Hz. Controls Level: Two or four front-panel, gray rotary level controls, one for each channel. Power: Front-panel switch; on when in the right-hand position. Indicators Signal: Two or four green LEDs, one for each channel, illuminates when the channels input signal level is above 40 dBu. Clip: Two or four front-panel red LEDs, one for each channel, illuminates when the channels output signal is being overdriven. Power: Yellow front-panel LED indicates amplifier has been turned on and AC power is available. AC Mains: Red fron |
|
 |
Crown XTI 2000 |
|
Crown
Crown XTI 2000 Crown XTI 2000 Description: The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class. XTi-Series amplifiers feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon and binding-post outputs, short-circuit protection and more. With their powerful, reliable performance, XTi-Series amps easily handle 2-ohm loads and are capable of chest-thumping lows. Plus, your investment in an XTi-Series amplifier is backed by Crown's Three-Year, No-Fault, Fully Transferable Warranty. Crown XTI 2000 Features: Integrated proprietary DSP with LCD front panel display. Accurate, uncolored sound with very low distortion for the best in music and voice reproduction Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Extremely versatile, handling a wide range of speaker impedances and outputs Switch-mode universal power supply Speaker presets for crossover frequencies, EQ, limiting, and delay All products fill 2U rack spaces and weigh under 17 pounds; weight sets a new standard in lightweight amps (20% less) Speakon and binding post outputs, XLR inputs and loop-thrus Comprehensive LED status per channel Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Crown XTI 2000 Specifications: Output Power (1 kHz, 0.5% THD) Stereo Bridge-Mono 8 Ohm 4 Ohm 2 Ohm 8 Ohm 4 Ohm XTi 4000 650W 1200W 1600W* 2400W 3200W* XTi 2000 475W 800W 1000W* 1600W 2000W* XTi 1000 275W 500W 700W* 1000W 1400W* *With 1% THD. Voltage Gain at 1kHz, 8 ohm rated output: XTi 1000: 30.5 dB XTi 2000: 32.9 dB XTi 4000: 34.2 dB Frequency Response: +0/-1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms. Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. Sensitivity: 1.4V Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A weighted). Damping Factor: Better than 500 from 20 Hz to 400 Hz. Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz. Input Stage: Input is electronically balanced and employs precision 1% resistors. Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced. Maximum Input Signal: +22 dBu typical. AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V 50/60 Hz. AC Line Current: XTi 1000: 6.5A XTi 2000: 6.9A XTi 4000: 8.0A At Idle: Draws no more than 90 watts. Operating T |
|
 |
Crown XTI 4000 |
|
Crown
Crown XTI 4000 Crown XTI 4000 Description: The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class. XTi-Series amplifiers feature an LCD screen with DSP speaker presets for crossover frequencies, EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan assisted cooling, XLR inputs, Speakon and binding-post outputs, short-circuit protection and more. With their powerful, reliable performance, XTi-Series amps easily handle 2-ohm loads and are capable of chest-thumping lows. Plus, your investment in an XTi-Series amplifier is backed by Crown's Three-Year, No-Fault, Fully Transferable Warranty. Crown XTI 4000 Features: Integrated proprietary DSP with LCD front panel display. Accurate, uncolored sound with very low distortion for the best in music and voice reproduction Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults Extremely versatile, handling a wide range of speaker impedances and outputs Switch-mode universal power supply Speaker presets for crossover frequencies, EQ, limiting, and delay All products fill 2U rack spaces and weigh under 17 pounds; weight sets a new standard in lightweight amps (20% less) Speakon and binding post outputs, XLR inputs and loop-thrus Comprehensive LED status per channel Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications Crown XTI 2000 Specifications: Output Power (1 kHz, 0.5% THD) Stereo Bridge-Mono 8 Ohm 4 Ohm 2 Ohm 8 Ohm 4 Ohm XTi 4000 650W 1200W 1600W* 2400W 3200W* XTi 2000 475W 800W 1000W* 1600W 2000W* XTi 1000 275W 500W 700W* 1000W 1400W* *With 1% THD. Voltage Gain at 1kHz, 8 ohm rated output: XTi 1000: 30.5 dB XTi 2000: 32.9 dB XTi 4000: 34.2 dB Frequency Response: +0/-1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms. Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo mode, 4 to 16 ohms in Bridge-Mono mode. Sensitivity: 1.4V Signal to Noise Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A weighted). Damping Factor: Better than 500 from 20 Hz to 400 Hz. Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz. Input Stage: Input is electronically balanced and employs precision 1% resistors. Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced. Maximum Input Signal: +22 dBu typical. AC Line Voltage and Frequency Configurations Available: 100V, 120V, 220-240V 50/60 Hz. AC Line Current: XTi 1000: 6.5A XTi 2000: 6.9A XTi 4000: 8.0A At Idle: Draws no more than 90 watts. Operating T |
|
 |
D' Aquisto Avant Garde Acoustic Guitar |
|
D'Aquisto
D' Aquisto Avant Garde Acoustic Guitar Specifications 17" width full acoustic guitar with solid spruce top Flamed maple back and sides 1 piece maple neck with ebony fingerboard "accutone" height adjustable ebony bridge Natural finish Included exclusive hardshell case |
|
 |
D' Aquisto Centura Acoustic Guitar |
|
D'Aquisto
D' Aquisto Centura Acoustic Guitar Specifications 17" width full acoustic guitar with solid spruce top Flamed maple back and sides 1 piece maple neck with ebony fingerboard "accutone" height adjustable ebony bridge Natural finish Included exclusive hardshell case |
|
 |
D' Aquisto Centura Electric Guitar |
|
D'Aquisto
D' Aquisto Centura Electric Guitar Specifications 14" Semi-hollow guitar with solid spruce top Mahogany (Hollow Construction) 1 Piece maple neck with ebony fingerboard "Accutone" height adjustable ebony bridge Equipped with a Humbucking pickup and 1 volume, 1 tone control Included exclusive hardshell case |
|
 |
D' Aquisto Jazz Line Acoustic Guitar |
|
D'Aquisto
D' Aquisto Jazz Line Acoustic Guitar Specifications 16" width full acoustic guitar with solid spruce top Flamed maple back and sides 1 piece maple neck with ebony fingerboard Equipped with a humbucking pickup and 1V/1T controls Natural finish Included exclusive hardshell case |
|
 |
D' Aquisto New Yorker Acoustic Guitar |
|
D'Aquisto
D' Aquisto New Yorker Acoustic Guitar Specifications 17" width full acoustic guitar with solid spruce top Flamed maple back and sides 1 piece maple neck with ebony fingerboard "accutone" height adjustable ebony bridge Equipped with a Humbucking pickup and 1 volume, 1 tone control Natural finish Included exclusive hardshell case |
|
 |
D' Aquisto New Yorker Electric Guitar |
|
D'Aquisto
D' Aquisto New Yorker Electric Guitar Specifications Electric version of the 9DQNYE full acoustic guitar Same features as the 9DQNYE, except that this model is equipped with a humbucking pickup and 1 volume, 1 tone control Includes exclusive hardshell case |
|
 |
D' Aquisto Semi Hollow Guitar |
|
D'Aquisto
D' Aquisto Semi Hollow Guitar Specifications Body : 14" width Semi-hollow, with Ivory multiple binding Top : Flamed Maple, carved Back : Mahogany, hollow construction Neck : Maple 1 pcs Fingerboard : Ebony with muliply binding Frets : 22F, #213 Scale : 24-3/4" Pickups : 2 x Original Open humbucker Controls : 1 x Volume, 1 x Tone 1x PU Select Switch Bridge : Gold plated metal, height adjustable Tailpiece : Gold plated metal, height adjustable Machineheads : Gotoh SG301, Gold Plated, Ebony Keys |
|
 |
D' Aquisto Solo Acoustic Guitar |
|
D'Aquisto
D' Aquisto Solo Acoustic Guitar Specifications 17" width full acoustic guitar with solid Sitka spruce top Flamed maple back and sides 1 piece maple neck with ebony fingerboard "Accutone" height adjustable ebony bridge Included exclusive hardshell case Natural finish |
|
| |
